Order Fridge Magnets
Upload your print-ready file, choose the cut, add the run to your cart.
How will you send us the design?
Drop your PDF here, or choose a file
A single-page, print-ready PDF — up to 30 MB.
67 × 46 mm plus 2 mm bleed. For a custom cut, the cut line must be a CutContour spot colour.
Uploading…
Uploaded file
Page 1 of your file. This is what goes to press.
Your file has been received. This server could not render a PDF preview; your file is checked by hand before printing.
File check
If you made the design in Canva, Figma or Google Drive there is nothing to export: paste the share link here and we will prepare the print-ready file for you.
Leave the link open to view
Set sharing to "anyone with the link can view". Skip that step and we cannot open it, and your order waits. You do not need to give edit access.
Your order is placed straight away. We prepare the file and check it before printing; if anything is wrong we will write to you.
File Requirements
- Trim size
- 67 × 46 mm
- Bleed
- Resolution
- 300 DPI, CMYK
Keep type and logos at least 4 mm inside the cut line — cutting is the least forgiving step in this job.